Engineering, 15.02.2021 20:30, Alexaisokay1

Suppose you want to build a digital logic project using only NAND gates. The output of each NAND gate will be connected to the inputs of one or more other NAND gates. Assume that the logic chips you are using have the following characteristics. Compute the DC noise margin and the largest fanout (number of gate inputs connected to a single output) that you can achieve while still maintaining the stated DC noise margin. VCC= 4.5V VOH= 4.0 V VOL= 0.5V VIH= 2.4V VIL=2.1V
VTH= (VOH- VOL)/2 IOH= -10μA IOL= 10μA IIH= 1μA IIL= -1μA

Calculate the following values:
a. Noise margin for HIGH (Volts):
b. Noise margin for LOW (Volts):
c. Noise margin overall (Volts):
d. Practical Fanout for HIGH:
e. Practical Fanout for LOW:
f. Practical Fanout overall:

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:20, karatsgrande3772

Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t

Answers: 3

continue

Engineering, 04.07.2019 18:20, xcapo1x

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

continue

Do you know the correct answer?

Suppose you want to build a digital logic project using only NAND gates. The output of each NAND gat...