A tank with an attached manometer contains water at 20°C. The atmospheric pressure is 100 kPa. There is a stopcock located 1 m from the surface of the water in the manometer. The stopcock is closed, trapping the air in the manometer, and water is added to the tank to the level of the stopcock. Required:
Find the increase in elevation of the water in the manometer assuming the air in the manometer is compressed isothermally.

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.