A linear transformer couples a load consisting
of a 360 O resistor in series with a 0.25 H
in...
Engineering, 12.02.2021 14:00, peno211
A linear transformer couples a load consisting
of a 360 O resistor in series with a 0.25 H
inductor to a sinusoidal voltage source, as
shown. The voltage source has an internal
impedance of 184 + /0 Cl and a maximum voltage of 245.20 V, and it is operating at 800 rad/s.
The transformer parameters are Ri = 100 fl,
Lt
= 0.5 H, R2 = 40 O, L2 = 0.125 H, and
k = 0.4. Calculate (a) the reflected impedance;
(b) the primary current; and (c) the secondary
current.
Answers: 3
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:20, RiverH246
Air flows over a heated plate Γ t a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
English, 19.04.2021 06:30
History, 19.04.2021 06:30
History, 19.04.2021 06:30
Mathematics, 19.04.2021 06:30
Advanced Placement (AP), 19.04.2021 06:30