Engineering, 11.02.2021 21:10, xxiigiddy18

At Bob’s Discount Materials Testing Emporium of Wonders, a client looking to save a few dollars wanted a test conducted in order to find the Poisson’s Ratio for a material with elastic modulus, E = 70 GPa. A 200-mm long sample with circular cross-section (diameter = 20 mm) was subjected to an elastic axial load of 60 kN. Due to funding cuts and general apathy by the staff, the equipment isn’t available to measure axial strain while in the testing apparatus so it must be calculated. Under load, the diameter was measured (using a cheap Harbor Freight micrometer) and found to have contracted by 0.015 mm. As an overworked, unpaid intern on Bob’s staff, sigh, roll your eyes, and begrudgingly calculate the following values: a. Lateral Strain, εlat.
b. Axial Strain, εaxial.
c. Poisson's Ratio, V = .
d. Shear Modulus, G = .GPa

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, BardiFan

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

continue

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

Do you know the correct answer?

At Bob’s Discount Materials Testing Emporium of Wonders, a client looking to save a few dollars want...