Engineering, 09.02.2021 01:00, lisabrewer18

onsider a plane composite wall that is composed oftwo materials of thermal conductivitieskA0.1 W/mKandkB0.04 W/mK and thicknessesLA10 mm andLB20 mm. The contact resistance at the interfacebetween the two materials is known to be 0.30 m2K/W. Material A adjoins a fluid at 200C for whichh10W/m2K, and material B adjoins a fluid at 40C forwhichh20 W/m2K.(a) What is the rate of heat transfer through a wall thatis 2 m high by 2.5 m wide?(b) Sketch the temperature distribution

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 19:30, 10040813

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 18:10, 0436500

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

continue

Engineering, 04.07.2019 18:20, sanchez626

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

continue

Do you know the correct answer?

onsider a plane composite wall that is composed oftwo materials of thermal conductivitieskA0.1 W/mKa...