Engineering
Engineering, 08.02.2021 19:30, volocibel

A standard penetration test was carried out in a normally consolidated sand at 7.62 m depth where the N60 was determined to be 28. The unit weight of the sand is 17.29 kN/m3 , and the grain-size distribution suggests that D50 5 1.2 mm and Cu 5 3.2. The age of the soil since deposition is approximately 5000 years. Determine the relative density using the different correlations discussed in Section 3.15 [i. e., Eqs. (3.21), (3.22), (3.23), (3.24), and (3.28)].

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, cowgyrlup124
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
image
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
image
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
image
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Do you know the correct answer?
A standard penetration test was carried out in a normally consolidated sand at 7.62 m depth where th...

Questions in other subjects: