Engineering, 05.02.2021 22:00, rileymorrison5836

A bar of mild steel has a diameter of 75 mm and is placed inside a hollow aluminum cylinder ofinternal diameter 75 mmand external diameter 100 mm; both bar and cylinder are the same length. Theresulting composite bar is subjected to an axial compressive load of 1000 kN. If the bar and cylindercontract by the same amount, calculate the stress in each. The temperature of the compressed compositebar is then reduced by 150Cbut no change in length is permitted. Calculate the final stress in the bar and the cylinder if E(steel)= 200,000 N/mm^2, E(aluminum)= 80,000 N/mm^2, coefficient of linear expansion for steel= 0.0000012/C and coefficient of linear expansion for aluminum= 0.000005/C.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 18:10, Talos02

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:20, dlr1628

Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?

Answers: 2

continue

Engineering, 04.07.2019 19:10, nbunny7208

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces. a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

continue

Do you know the correct answer?

A bar of mild steel has a diameter of 75 mm and is placed inside a hollow aluminum cylinder ofintern...