Engineering, 02.02.2021 01:00, ily50
Based on the loads defined for this three dimensional (3-D) truss structure, complete the following for the redesign of outer truss sections: a) Determine the structural loads in truss members AD, AE, BE, CD, CE, and DE. b) Assuming that the truss members will all be constructed of 4130 alloy steel tubing, propose a cross-sectional geometry for each truss member that provides the following safety factors (FoS) - FoS of at least 3 against yielding, and - FoS of at least 1.5 against buckling. The cross-sectional geometry must be of standard stock sizes readily available from suppliers, such as OnlineMetals. c) Calculate the actual FoS for outer truss sections under the maximum defined loads based on your geometry selection(s). d) Estimate the material cost per truss sub-section, which contains the six truss members. e) Discuss the manufacturability of redesigned outer truss sections based on your geometry selection(s).
Answers: 1
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20, samantha636
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
Based on the loads defined for this three dimensional (3-D) truss structure, complete the following...
English, 06.07.2019 17:50
English, 06.07.2019 17:50
Social Studies, 06.07.2019 17:50
Mathematics, 06.07.2019 17:50
Spanish, 06.07.2019 17:50