Engineering, 30.01.2021 14:00, martina28

**Can someone please help me solve these problems step by step, thank you! 1. If a 12-inch diameter driving Gear A has 100 tooth which turns CCW with a torque of 200 ft-lb and 100 rpm is meshed with Gear B, 25 tooth, turn along with Gear C, 50 tooth as they are a compound gear and Gear D, 150 tooth meshed with C.
-->sketch and annotate the gear train.
-->what direction does gear ratio B, C, and D turn?
-->what is the gear ratio for B, C, and D?
-->what is the angular velocity for gears B, C, and D?
-->what is the torque for gears B, C, and D?
-->what is the diameter of gears B, C, and D?

2. In a pulley system, pulley A is moving 1000 rpm and has a diameter of 18inches. There are two pulleys with different sizes, B moving ot 1575 rpm and C moving at 1850 rpm attached on a single axle.
-->sketch and annote the pulley system.
-->what is the diameter of pulley B and pulley C?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 03.07.2019 14:10, BardiFan

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

continue

Engineering, 04.07.2019 18:10, jadeochoa4466

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, jojoangelique13

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

continue

Do you know the correct answer?

**Can someone please help me solve these problems step by step, thank you! 1. If a 12-inch diameter...