Engineering, 29.01.2021 16:00, onlymyworld27
A cross beam in a highway bridge experiences a stress of 14 ksi due to the dead weight of the bridge structure. When a fully loaded tractor-trailer crosses over the bridge, however, the stress in the beam increases to 45 ksi. The beam is fabricated from steel with an ultimate tensile strength of 76 ksi, a yield strength of 50 ksi, and an endurance limit of 38 ksi.
Find the safety factor for an infinite fatigue life:
(a) if the effect of mean stress on fatigue strength is ignored
(b) when the effect of mean stress on fatigue strength is considered.
Answers: 2
Engineering, 04.07.2019 18:10, danksans7011
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10, alyssabailey7545
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
A cross beam in a highway bridge experiences a stress of 14 ksi due to the dead weight of the bridge...
Social Studies, 08.06.2021 19:20
Chemistry, 08.06.2021 19:20
English, 08.06.2021 19:20
English, 08.06.2021 19:20