Engineering, 27.01.2021 21:40, tiggyandrep2dbee

If all terminations are rated at 75 degrees C in you have a need for a conductor that carries over 100 amps in size at 1/0AWG or larger with the no other factors you may select the conductor size from what column in T310.15(B)16. A. 60 degree C
B. 75 degree C
C. 90 degree C

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 06.07.2019 03:10, lacourboud20005

An electrical kettle is made out of stainless steel, weighs two pounds (when empty) with a heating element that consumes 2 kw of electricity. assuming that the water and the kettle are at the same uniform temperature at any moment of time, calculate the shortest possible time to bring 2 quarts of water from room temperature to the onset of boiling.

Answers: 1

continue

Engineering, 06.07.2019 03:20, mardell2587

Acountershaft is supported by two tapered roller bearings using indirect mounting. the radial bearing loads are 1120 lb for the left-hand bearing and 2190 lb for the right-hand bearing. the shaft rotates at 400 rpm and is to have an l10 life of 40,000 hours and an application factor of 1.4. assume ka2k 15, and find the required radial rating of each bearing

Answers: 3

continue

Engineering, 06.07.2019 04:10, j015

Apinion having 30 involute teeth of 6,5 module rotates at 220 r/min and transmits 2 kw to a gear wheel having 70 teeth; the addendum on both wheels is 4 of the circular pitch and the angle of obliquity is 200. determine; 3.1 the lengths of the path of approach and the arc of approach 3.2 the normal force between the teeth at an instant when there is only one pair of teeth in contact

Answers: 2

continue

Engineering, 06.07.2019 04:10, trist22

An inventor claims to have developed a reversed heat engine (ie. a heat pump) which is able to deliver 10 kj heat into the room at 20°c from outside ambient temperature of -10°c by consuming only 2 kj electricity in winter. this claim is a)-impossible b)-possible only if the heat pump is ideal c)-practically possible d)-unable to be assessed as it depends on the working fluid used in the heat pump.

Answers: 2

continue

Do you know the correct answer?

If all terminations are rated at 75 degrees C in you have a need for a conductor that carries over 1...