Engineering, 27.01.2021 18:50, Rich3537
Select the correct answer
Ben works in the quality assurance department of a fabric manufacturing company. His supervisor asks him to check if the tensile strength of a batch is within allowable
values. Which quality engineering aspect will guide Bento do this task?
OA. Specifications
OB. specification limits
Oc. nonconformity
OD. product variability
Answers: 2
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10, oliviasoreo92
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 19:20, carterdaw
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
Select the correct answer
Ben works in the quality assurance department of a fabric manufacturing c...
Social Studies, 23.09.2021 14:00
Mathematics, 23.09.2021 14:00
Social Studies, 23.09.2021 14:00
History, 23.09.2021 14:00
Mathematics, 23.09.2021 14:00