Engineering, 22.01.2021 19:50, terrickaimani

═══════════════════░▒░═════════════ ═════ ════════════▒▒▒▓███████████▓▒══════ ═════
════════▒██████████▓▓▓▓██▓████▓════ ═════
══════▒███████▓█▓▓▓█▓█▓███▓▓▓███═══ ═════
═════▓███▓██▓▓████▓██▓█▓▓▓███▓██▒══ ═════
═════▓██▓███▓█▓████████▓▓█████▓██══ ═════
═════▒█████████▓▓▓███████████████▒═ ═════
═════▒██████▓█████▒▒▒▒▒██████████▒═ ═════
═════▒███████▓█▓█▒═════░▒▓█▓▓▒▒██▒═ ═════
═════▒█████████▓█▓░░▒▒░░░░░▒▒▒▒██▒═ ═════
═════▒████████████▒░▒▒▒▒▒▒▒▒▒▒▒▓█▒═ ═════
═════▒██████████▓▓▓▒▒▒▒▒▒▒▒▒▒▒░▓█▒═ ═════
═════▒███████▓███▓▒▒▒▒▒▒▒▒▒▒▒▒░▒▓▒═ ═════
═════▓█▒░░▓██▓█▓▒▒▒▒░░░░░░░░░░░▒█▒═ ═════
═════▓█▒▒▒░▒███▒░░▒░░░▒▒▒▒▒█▓█████═ ═════
═════██░▒██▒▒████▒░▓██████████████═ ═════
═════▒█▒▒▒▓▒░▓█▓███████████▒▒█████═ ═════
══════▒█═░░▒▒▒█▒▒▒▒█▓██████░═████══ ═════
═▒▓███▓██░░▒▒▒▒▒▒▒▒██████▓▒░░▒██▒══ ═════
██████████▓█▒▒▒▒▒▒▒▒█▓▒▒▒▒░░░═░█═══ ═════
█████████▓▓█▓▒▒▒▒▒▓▒▒▒▒▒▒▒▓▓▒░▒█═══ ═════
██████████▒▒▓▓▒▒▒▒▒▒▒▒▒▒░▒▓██▓▒█═══ ═════
▓▓█▓████▓▒▒▒▒▓▓▒▒▒▒▒▒▒▒▒▓▒▒▒▓▓▓██══ ═════
██▓▒██▒░░▒▓▒▒▒▓█▓▒▒▒▒▒▒█████▒▒▓███═ ═════
█▓▒█▓░░▒▒▒▒▒▒▒▒▒▓▓▒▒▓▒▒░░░▒▒▒▒█████ ═════
▓▓██░░▒▒▒▒▒▒▒▒▓▒▒▓▓▓▒▒▒▒▒▓██▓▓█████ █════
▓██▒░▒▒▒▒▒▒▒▒▒▓▓▓▓▓██▓▒▒▒░▒░▒█████▓ ██═══
▓▓█▒░▒▒▒▒▒▒▓▒▒▒▓▓██████▓▒▒▒▒█████▓▓ ██░══
█▓█▒░▒▒▒▒▒▒▒▒▒▓▓▓▓████████▓▒████▓██ ▓██══
▓██▒░▒░▒░░░▒▒▒▒▒▒▒▓▓████▓▒▒▒███▓▓█▓ ▓▓█══
▒██░░░░░░░░▒▒▒▒▒▒▒▓▓███▓▓▒▒██▓█▓█▓▒ █▓██░
▒█▒═░░░░░▒▒░▒▒▒▒▒▒▒▒▒▒▒▓▒▒██▓▓▒█▒▒█ ▓▒▒▓█
▒█▓░░░░░░░▒▒░▒▒▒▒░░░░▒▒░░██▒▓▒▓▒▒█▓ ▒▒▒▒█
▒▒█▒═░░░░░░░░░░░░░░░▒░═▒█▒▒▓▒▓█▓▓▒▒ ▒▒▒▒▓
█▒█▒═░░░░░░░░░░░░░░▒═░██▒▒▒▓▓▒▒▓▒▒▒ ▒▒▓▒▓
▓▓▒█░░░░░░░░░░░░░░░═▒█▒▒██▓▒▒▓▒▒▒▒▒ ▓▓▓▒▓
▓█▒█▒═░░░░░░░░▒░░░═▒█▒▒▓▓▓▓▓▒▒▓▒▒▓▓ ▓▓▒▓▓
▓█▓▒▒═░░░░░▒░▒░░▒═▒█▒▓▓▓▓▓█▓▒▒█▓▒▓▓ ▓▒▓▓▒
▓▓█▓▒░░░░░░░▒▒▒▒═░█▓▓▓▓▓▓▓▓▓▓▒▓██▒▒ ▒▓▓█▓
▓▓▓▓█▒═░░░░▒▒▒▒═░▓▓▓▓▓▒▓███▒▓█▒▒▓█▓ ▒▒▒▒▒
▓▓▒▓█▓═░░▒▒░▒▒═░██▓▓▓▓▓████▒▓▓██▓▓█ █▓▓▓▓
▓▒▒▓▒█░░▒▒░▒░═▒█████████▓███▓▓▓▓▓▓▓ ▓████
▓█▓▓▓█▓═▒░▒░░██████████████▓███████ █████
▓█▓▓▓▒█░░▒═░██████▓█▓█▓█▓▓▓▒█▒▒▒▒▒█ █████ Free Points

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 19:10, pjgolden04

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

Answers: 2

continue

Engineering, 04.07.2019 19:10, Mimidj9279

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Answers: 2

continue

Engineering, 04.07.2019 19:20, amandaaarmentaa

Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?

Answers: 1

continue

Engineering, 04.07.2019 19:20, kaitlyn114433

Ashielded metal arc-welding operation is accomplished in a work cell by a fitter and a welder. the fitter takes 5.5 min to load components into the welding fixture at the beginning of the work cycle, and 1.5 min to unload the completed weldment at the end of the cycle. the total ength of the weld seams 1200 mm, and the travel speed used by the welder averages 300 mm/min. every 600 mm of seam length, the welding stick must be changed, which takes 0.8 min. while the fitter is working, the welder is idle (resting): and while the welder is working the fitter is idle. (a) determine the average arc-on time as a fraction of the work cycle time. (b) how much improvement in arc-on time would result if the welder used flux-cored arc welding (manually operated), given that the spool of weld wire must be changed every 10 weldments, and it takes the welder 5.0 min to accomplish the change? (c) what are the production rates for these two cases (weldments completed per hour)? attach your work and solutions.

Answers: 1

continue

Do you know the correct answer?

═══════════════════░▒░═════════════ ═════ ════════════▒▒▒▓███████████▓▒══════ ═════
═══════...