Engineering, 22.01.2021 01:00, seider7997

An inclined plane is used to lift a box into a moving truck the ramp is 6 M long and 1.5 M from the ground what is the mechanical advantage of the inclined plane what is the mechanical advantage of the following pulley the pulley has six supporting ropes but the force end is down

the work output of a lever used to lift books is 30 joules in the work input is 60 joules what is the efficiency of this lever

Scott needs to split a chunk of wood for the fire there is a crack in the trunk if he uses an ax it will use 200 joules of energy he received 100 joules of work out of the machine A) What type of simple machine has he used. B) What is the efficiency of the machine.

would you do more work moving 100 boxes weighing 12N for 1m or moving a 1000N box, 30cm.

a ramp is used to lift a box into a truck the distance is lifted is 1.5 meters the box has a mass of 5 kg what amount of work must be completed in order to lift the Box

how much work is needed to lift the books onto a shelf if the books weigh 25N in the Shelf is 500 cm High

a machine has an actual mechanical advantage of six what is the ideal mechanical advantage of the machine is 80% efficient

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, abdirahmansoloman

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

continue

Engineering, 04.07.2019 18:10, QueenLife4869

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

continue

Engineering, 04.07.2019 18:20, sarah7984

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

continue

Do you know the correct answer?

An inclined plane is used to lift a box into a moving truck the ramp is 6 M long and 1.5 M from the...