Engineering, 21.01.2021 22:20, ahmedeldyame

ASAE 1060 Steel wire (1 mm diameter) is coated with copper to form a composite with a diameter of 2mm. Use the following properties for parts a, b, and c of question 2: The elastic modulus of copper is 110 GPa The yield stress of the copper is 140 MPa The coefficient of thermal expansion of the copper is 17 times 10^-6/degree C. The elastic modulus of steel is 205 GPa The yield stress of the steel is 280 MPa The coefficient of thermal expansion of the copper is 10 times 10^-6/degree C Determine: a. The elastic modulus of the composite b. The maximum force that the composite will carry before either material yields c. The coefficient of thermal expansion of the composite material.

Answers: 2

Show answers

Answers

answered: preciousweeks11

a) $E_{m}$ = 133.75 Gpa

b) Fnet = 560 N

c) thermal expansion of the composite material = 14.31 $10^{-6 }$ / °C

Explanation:

Solution:

a) Elastic Modulus of the composite:

Area of steel wire = $\frac{\pi }{4}$ x ( $0.001^{2}$ ) = 0.8 x $10^{-6}$ $m^{2}$

Area of Copper wire = $\frac{\pi }{4}$ x ( $0.002^{2}$ ) - 0.8 x $10^{-6}$ $m^{2}$

Area of Copper wire = 2.4 x $10^{-6}$ $m^{2}$

Young's Modulus of Composite mixture:

$E_{m}$ = $F_{st}$ $E_{st}$ + $F_{Cu}$ $E_{Cu}$ Equation 1

here,

$F_{st}$ = Stress in Steel

$F_{Cu}$ = Stress in Copper.

We know that,

F = P/A

F is inversely proportional to Area, so if area is large, stress will less and vice versa. So, Take

Ratio for area of steel = $\frac{0.8. 10^{-6} }{(0.8 + 2.4) .10^{-6} }$

Ratio for area of steel = $\frac{0.8}{3.2 }$ = 0.25

Similarly, for Copper,

Ratio for area of copper = $\frac{2.4. 10^{-6} }{(0.8 + 2.4) .10^{-6} }$

Ratio for area of copper = $\frac{2.4 }{3.2}$ = 0.75

Put these values in equation 1:

$E_{m}$ = $F_{st}$ $E_{st}$ + $F_{Cu}$ $E_{Cu}$

$E_{m}$ = (0.25) $E_{st}$ + (0.75) $E_{Cu}$

We are given that,

$E_{st}$ = 205 Gpa

$E_{Cu}$ = 110 Gpa

So,

$E_{m}$ = (0.25) (205 Gpa) + (0.75) (110 GPa)

$E_{m}$ = 51.25GPa + 82.5 Gpa

Hence, the Elastic Modulus of the composite will be:

$E_{m}$ = 133.75 Gpa

b) maximum force:

Fnet = Fst + Fcu

We know that F = (Yield Stress x Area)

F = fst x Ast + fcu x Acu

And we are given that,

Yield stress of Steel = 280 Mpa

Yield stress of Copper = 140 Mpa

And,

Ast = 0.8 x $10^{-6}$ $m^{2}$

Acu = 2.4 x $10^{-6}$ $m^{2}$

Just plugging in the values, we get:

F = (280 Mpa) (0.8 x $10^{-6}$ $m^{2}$ ) + (140 Mpa) (2.4 x $10^{-6}$ $m^{2}$ )

F = 224 + 336

Fnet = 560 N ( because Mpa = $10^{6}$ N/ $m^{2}$ )

So, it means the composite will carry the maximum force of 560N

c) Coefficient of Thermal Expansion:

Strain on both material is same upon loading so,

(ΔL/L)st = (ΔL/L)cu

by thermal expansion equation:

( $\alpha .$ ΔT + $\frac{F}{A}$ $. \frac{1}{Est}$ ) = $\alpha .$ ΔT + $\frac{F}{A}$ $. \frac{1}{Ecu}$ )

Where $\alpha$ = Coefficient of Thermal expansion

Here, fst = -fcu = F

and ΔT = 1°

So,

Plugging in the values, we get.

( 10 x $10^{-6}$ x (1) + $\frac{F}{0.8.10^{-6} } . \frac{1}{205 . 10^{9} }$ ) = ( 17 x $10^{-6}$ x (1) + $\frac{-F}{2.4.10^{-6} } . \frac{1}{110 . 10^{9} }$ )

Solving for F, we get:

F = 0.71 N

Here,

fst = F = 0.71 N (Tension on Heating)

fcu = -F = 0.71 N ( Compression on Heating )

So, the combined thermal expansion of the composite material will be:

(ΔL/L)cu = ( 17 x $10^{-6}$ x (1°) + $\frac{-0.71}{2.4.10^{-6} } . \frac{1}{110 . 10^{9} }$ )

(ΔL/L)cu = ( 17 x $10^{-6}$ x (1°) - 2.69 x $10^{-6}$

combined thermal expansion of the composite material = 14.31 $10^{-6 }$ / °C

answered: Guest

the clapeyron equation (also called the clausius-clapeyron equation) relates the slope of a reaction line on a phase diagram to fundamental thermodynamic properties.

explanation:

answered: Guest

Diene d fbfjcnfd ebjjn

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, ashleybaber4966

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

continue

Engineering, 04.07.2019 18:20, esmemaluma00

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

continue

Do you know the correct answer?

ASAE 1060 Steel wire (1 mm diameter) is coated with copper to form a composite with a diameter of 2m...