Engineering, 19.01.2021 04:00, gymnastics255

11. What 2 ways would you specify a scale on the drawing, if it were drawn with a mechanical engineer's scale of 1” = 1”

12. What 2 ways would you specify a scale on the drawing, if it were drawn with a mechanical
engineer's scale of 3” = 1”

13. What way would you specify a scale on the drawing, if it were drawn with a metric engineer's
scale of half size

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Do you know the correct answer?

11. What 2 ways would you specify a scale on the drawing, if it were drawn with a mechanical engine...