Engineering, 05.01.2021 15:40, gabrieljerron
In a venturi nozzle flow, the inlet conditions are p1 = 08 x 103 kPa gauge and d1 = 100 mm and the outlet conditions are p2 = 0 kPa gauge and d2 = 50 mm. Find the flow rate of water. Assume CD = 0.98 for the venturi coefficient.
a) (30) Neglect viscous effects (friction loss).
b) (10) Consider viscous effects.
Answers: 2
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Do you know the correct answer?
In a venturi nozzle flow, the inlet conditions are p1 = 08 x 103 kPa gauge and d1 = 100 mm and the o...
Questions in other subjects:
Chemistry, 01.10.2021 01:10
Computers and Technology, 01.10.2021 01:10
History, 01.10.2021 01:10
