Engineering, 31.12.2020 19:40, kloekamakeeaina14

A hollow steel tube has a diameter of 300 mm, wall thickness of 20 mm and a length of 500 mm. A slot 20 mm wide is machined through the wall thickness and along the whole length of the
tube. The tube is positioned on a rigid horizontal surface with the slot at one extreme of a
horizontal diameter. A force W is then applied on the upper surface along the vertical diameter
and uniformly along the length of the tube. Calculate the magnitude of this force which is
necessary to just close the slot

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

Do you know the correct answer?

A hollow steel tube has a diameter of 300 mm, wall thickness of 20 mm and a length of 500 mm. A slo...