Engineering
Engineering, 27.12.2020 16:00, kishmarlewis

A wastewater treatment plant has a treatment capacity of 5000 m3/d with the average BOD of 150 mg/L, average total N of 40 mg/L, and average TSS of 350 mg/L in the primary settled effluent. The wastewater treatment process consists of primary settling, aeration tanks, secondary settling, and disinfection. The total suspended solid (TSS) in aeration tanks is 3500 mg/L. The settled sludge in the secondary settling tank is 10000 mg/L. The effluent regulation: BOD<10 mg/L, N<5 mg/L, and TSS<50 mg/L.
Calculation requirement:
1) Assume HRT in aeration tanks is 4 hrs, and the waste sludge flow rate from secondary settling tanks is 500 m3/d. Calculate the F: M ratio and SRT.
2) Discuss whether this system can achieve good BOD removal or N removal.
3) If you are asked to prolong SRT to 25 days, which engineering parameter you can adjust in this wastewater treatment system? Recalculate the Question (1) to make sure SRT is longer than 25 days.

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
image
Engineering, 04.07.2019 18:10, heidiburgos1own6c0
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
image
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
image
Engineering, 04.07.2019 18:10, jojoangelique13
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Do you know the correct answer?
A wastewater treatment plant has a treatment capacity of 5000 m3/d with the average BOD of 150 mg/L,...

Questions in other subjects:

Konu
Arts, 08.03.2021 21:00