Engineering, 25.12.2020 19:50, christophercordero15
You are given a 4-bit Serial-In-Parallel-Out register composed of D-flip-flops (positive-edge triggered) and the bits shift from left to right (LSB to MSB). Assume that all FFs are in state 0, initially. Given an input stream, 11010110, answer the following questions: a. Draw the timing diagram for the first 4 clock pulses (time steps), representing the clock signal and the FF states. b. What are the output values between the 6th and 7th clock pulses (ie, the positive edge of the 6th clock pulse has happened, and the positive edge of the 7th clock is yet to happen)?
Answers: 2
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Do you know the correct answer?
You are given a 4-bit Serial-In-Parallel-Out register composed of D-flip-flops (positive-edge trigge...
Questions in other subjects:
Physics, 29.06.2019 05:10
