Engineering, 22.12.2020 20:10, gonzaleze18

It is required to design a conditioning circuit that interfaces a sensor to a data acquisition (DAQ) device. The sensor has 10 Ω output resistance and a maximum output voltage of 20 mV. The DAQ has an input resistance of 50 kΩ with an input range of (0-12)V. Design a conditioning circuit with three stages: Stage (1): a differential amplifier.
Stage (2): a non-inverting amplifier.
Stage (3): a voltage buffer.
It is required that stage (1) and (2) to have the same gain.

In the differential amplifier, let R1 = 10 kΩ, find R2 in (kΩ).

In the inverting amplifier. Let if R1 = 20 kΩ, find R2 in ( kΩ).

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, jadeochoa4466

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, oshawn108

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k

Answers: 2

continue

Engineering, 04.07.2019 18:20, cristykianpour

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

continue

Engineering, 04.07.2019 19:20, mads000

Determine (a) the maximum thermal efficiency of reversible power cycles operating between a hot reservoir at 1000°c and a cold reservoir at 200°c and (b) the maximum cops for reversible refrigeration and heat pump cycies, respectively, between 28°c and 14°c.

Answers: 1

continue

Do you know the correct answer?

It is required to design a conditioning circuit that interfaces a sensor to a data acquisition (DAQ)...