Engineering, 22.12.2020 05:20, brianwins07

Find the solidification time of the two iron castings when both are poured (with no superheats) into the sand molds at initial temperature 28°C.

(i) A slab shaped casting of 10 cm thickness, (ii) a sphere of 10 cm in dia. Iron: freezing temp: 1540°C; L= 272 kJ/kg; density = 7850 kg/m3 Sand: c = 1.17 kJ/kg-K; k = 0.865 W/mk; density = 1600 kg/m3

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 03.07.2019 23:20, abbz13

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

continue

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, aaliyah80

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

continue

Do you know the correct answer?

Find the solidification time of the two iron castings when both are poured (with no superheats) int...