Engineering, 19.12.2020 17:50, MIa2020
Two particles, A and B, are moving in a straight line. Take this to be the x-axis. At
t = 0, particle A is trailing particle B, initially at some distance x behind B. Particle B
is accelerating at a constant 2.00 m/s2 and particle A is constantly accelerating at 3.00
m/s2
. Particle A was able to overtake B after B has moved 50.0 m.
(a) How long does it take for particle A to overtake B?
(b) Initially, how far was A behind B?
(c) How fast are the two particles moving as soon as they’re at the same position?
Answers: 1
Engineering, 04.07.2019 18:10, abdirahmansoloman
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 18:10, Strick1530
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 18:10, jesuslovesusall3
Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs
Answers: 2
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Two particles, A and B, are moving in a straight line. Take this to be the x-axis. At
t = 0, partic...
Mathematics, 10.02.2021 17:00
Mathematics, 10.02.2021 17:00
Physics, 10.02.2021 17:00
Chemistry, 10.02.2021 17:00
Biology, 10.02.2021 17:00
Arts, 10.02.2021 17:00