PINNACLE
Question 29 of 35
Using the directions below, create a drawing and identify the resu...
Engineering, 19.12.2020 01:00, kennakenken3
PINNACLE
Question 29 of 35
Using the directions below, create a drawing and identify the resulting image.
1. In the middle of the page, draw two vertical lines an inch long, an inch apart, and
that are parallel to each other.
2. About a half inch below the lines, draw a half-inch horizontal line that is centered
between the lines
3. Draw a line from the bottom of the left vertical line and connect it to the left end of
the horizontal line
4. Draw a line from the bottom of the right vertical line and connect it to the right end
of the horizontal line
5. From the top of the left vertical line draw a large arc and connect it to the top of
the right vertical line.
Which of the following does your image most resemble?
O a light bulb
a wheel
a pot
a railroad crossing sign
e
Answers: 2
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10, ijohnh14
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Arts, 23.10.2020 17:20
Computers and Technology, 23.10.2020 17:20
Mathematics, 23.10.2020 17:20
Social Studies, 23.10.2020 17:20
French, 23.10.2020 17:20
Mathematics, 23.10.2020 17:20
Mathematics, 23.10.2020 17:20