Engineering
Engineering, 14.12.2020 16:20, jumeljean123oythxy

Information such as tolerances and scale can be found in the of an engineering drawing.

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
image
Engineering, 04.07.2019 18:10, Strick1530
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
image
Engineering, 04.07.2019 18:20, cdyshaylia55
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
image
Engineering, 04.07.2019 19:10, ndaha
An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?
Answers: 2
Do you know the correct answer?
Information such as tolerances and scale can be found in the of an engineering drawing....

Questions in other subjects:

Konu
Mathematics, 18.09.2020 03:01
Konu
Mathematics, 18.09.2020 03:01
Konu
Mathematics, 18.09.2020 03:01
Konu
Mathematics, 18.09.2020 03:01
Konu
Mathematics, 18.09.2020 03:01
Konu
Mathematics, 18.09.2020 03:01
Konu
English, 18.09.2020 03:01
Konu
Mathematics, 18.09.2020 03:01
Konu
Mathematics, 18.09.2020 03:01
Konu
Mathematics, 18.09.2020 03:01