Engineering, 13.12.2020 23:40, chandlergward8

I need help with creating a Residual Valuation Calculation for a site I have chosen for my 'Office to Residential Conversion assignment' which is due on 18th December 2020. See the site details below: Chosen Site:-
Office for sale in Unit 10, Freeport Office Village, Braintree, Essex CM77
£550,000 (£240.91/sq. ft)

Purpose of the site: Convert from its current use as an office to a residential building.
Assignment Tasks:
-Produce a detailed residual method valuation with references.
-Research comparable resale values or rental income that can be derived from the proposed development
-Demonstrate knowledge and understanding of the overall development process
-Create a development plan showing disposal and use, and design of the development

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:20, hayleymckee

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

continue

Engineering, 04.07.2019 19:10, rayne40

A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?

Answers: 3

continue

Engineering, 04.07.2019 19:20, anggar20

Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3

Answers: 2

continue

Do you know the correct answer?

I need help with creating a Residual Valuation Calculation for a site I have chosen for my 'Office t...