Engineering, 03.12.2020 19:50, Ramirez72

Consider the flow of oil at 10 degree C in a 1.9m-diameter pipeline at an average velocity of 0.5 m/s. A 1500-m-long section of the pipeline passes through icy waters of a lake at 0 degree C. Measurements indicate that the surface temperature of the pipe is very nearly 0 degree C. Given:
rho = 893.6 kg/m3
mu = 2.326 kg/m. s
cp = 1839 J/kg. degree C
k = 0.1460 W/m. degree C
v = 2.592 times 10^-3 m^2/s
Pr = 28.750
If the pressure drop is 15.4kPa, what is the pumping power required to overcome the pressure losses and to maintain the flow of oil in the pipe?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:10, ayoismeisjjjjuan

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

continue

Engineering, 04.07.2019 18:10, chadatkin

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

continue

Do you know the correct answer?

Consider the flow of oil at 10 degree C in a 1.9m-diameter pipeline at an average velocity of 0.5 m/...