Engineering, 30.11.2020 01:20, carlosbs71

Will give Flowcharts are really useful tools that can help you organize your programming ideas in a logical sequence. Maybe you’ve encountered them in other areas of your life without even realizing it! Think about your favorite book of all-time. Chances are that the author put a lot of time and care into planning it out. If you were hired to write a sequel to this book, what are some of the steps that you would take to write something equally as awesome? Describe them in the order in which you would do them, and be specific!

Answers: 2

Show answers

Answers

answered: lil8174

Here's mine!!!

If I were to write a book I would write my steps down as in figuring out what I what to talk about. Have an Introduction- Using an introduction is needed because you need to Describe your main idea, or what the essay is about, in one sentence. ... Develop a thesis statement, or what you want to say about the main idea. ... List three points or arguments that support your thesis in order of importance (one sentence for each). I would also use a Rising action- This is needed because, To construct the plot, nearly any story can be said to use increasing action. It serves the following purposes: It generates suspense and enhances the sense of urgency around the story's central conflict or problem. Then I would do a Climax- The object of a climax is not to provide the most possible conflict or action. It's also not just about producing the character's greatest reversal of fortunes. Too often we mistake the fortunes of our character with the story's arc, and although fortune is involved, it's not our story arc's key criterion. After that, I would just add finish touches and finish it off before it needs to be shipped off to make copies.

answered: jdbessix3567

If I were to write a book I would write my steps down as in figuring out what I what to talk about. A lot of steps need to be taken when writing a book, first you need to know what your gonna write about, you need an outline for your story. You don’t need to have it all worked out, but it’s helpful to have a reasonable idea of the shape and direction of your book before you the actual writing begins. When writing a story I would recommend doing research, you’ll likely want to spend time in libraries absorbing everything you can about your subject. At some point after deciding upon what you will be writing and doing research you will need to write a rough draft. After your first draft you should go through and edit, fix anything that is in need of fixing and if you encounter writers block find yourself some inspiration. After your first draft you'll need a second drafter for you to apply your revisions and edits, the second draft is also a chance to address more granular questions about your writing. After you have completed all the steps you have finished!

This is everything I know about writing from ELA class.

Explanation:

answered: Guest

answer:

an example of solubility is salt or sugar dissolving in water.

rate as brainliest plz

answered: Guest

angvrswer:

vfg

grfhrtrhr:

jjj

yjujuju

jujuhuyhyt

bgf

bgr

gbr

bgr

gtr

bgr

gbgbbg

bgg

bbg

bfg

dcwf

fdb

ggb

rfe

gtg

gegte

gff

dfg

gfdsax

cvfbgnh

jmhngf

dsaazxscvb

nmhgb

fvdcsxaz

zxcv

bghn

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, mirmir62

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

continue

Do you know the correct answer?

Will give Flowcharts are really useful tools that can help you organize your programming ideas in a...