Engineering
Engineering, 29.11.2020 16:40, Jerrikasmith28

If an aluminum plate 4 mm thick is mounted in a horizontal position, and its bottom surface is well insulated. A special, thin coating is applied to the top surface such that it absorbs 80% of any incident solar radiation, while having an emissivity of 0.25. The density p and specific heat c of aluminum are known to be 2700 kg/m3 and 900 J/kg K, respectively. (a) Consider conditions for which the plate is at a temperature of 25 C and its top surface is suddenly exposed to ambient air at T=20 C and to solar radiation that provides an incident flux of 900 W/m2 . The convection heat transfer coefficient between the surface and the air is h = 20 W/m^2 K. What is the initial rate of change of the plate temperature?

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, Candi9697
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
image
Engineering, 04.07.2019 18:20, sarah7984
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
image
Engineering, 04.07.2019 18:20, rjone8429
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
image
Engineering, 04.07.2019 18:20, annette211pdd8v9
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
Do you know the correct answer?
If an aluminum plate 4 mm thick is mounted in a horizontal position, and its bottom surface is well...

Questions in other subjects:

Konu
Mathematics, 11.02.2021 20:20
Konu
Mathematics, 11.02.2021 20:20
Konu
Mathematics, 11.02.2021 20:20