Engineering, 25.11.2020 14:20, ijohnh14

Moist air enters a control volume operating at steady state witha volumetric flow rate of 3500 ft3/min. The moist air enters at 120°F,1.2 atm, and 75% relative humidity. Heat transfer occurs through asurface maintained at 50°F. Saturated moist air and condensate exitthe control volume, each at 68°F. Assuming Wcv = 0, and kinetic andpotential energy effects are negligible, determine: a. the mass flow rate of condensate, in lb/min.
b. the rate of heat transfer, in Btu/min.
c. the rate of entropy production, in Btu/R - min.
d. the rate of exergy destruction, in Btu/min, for T0 = 50 degrees F.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, agpraga23ovv65c

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

continue

Engineering, 04.07.2019 18:10, Candi9697

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

continue

Engineering, 04.07.2019 18:20, samueltaye

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

continue

Do you know the correct answer?

Moist air enters a control volume operating at steady state witha volumetric flow rate of 3500 ft3/m...