Engineering, 25.11.2020 14:00, ZacherySpeaks170

An 02-series single-row deep-groove ball bearing with a 30-mm bore is loaded with a 2 kN axial load and a 5 kN radial load. The inner ring rotates at 400 rpm. Required:
a. Determine the equivalent radial load that will be experienced by this particular bearing.
b. Determine the predicted life (in revolutions) that this bearing could be expected to give in this application with a 99% reliability.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 19:10, gabigalvis1091

What is the main objective of using reheat rankine cycle?

Answers: 3

continue

Engineering, 04.07.2019 19:10, babas97

What is a monomer? how do they form a ploymer from the view point of chemical bonding?

Answers: 1

continue

Engineering, 06.07.2019 03:20, crazylife77

What is the strain energy stored in a solid uniformly circular shaft of length 3.0 m and diameter 120 mm when subject to pure torsion if the maximum shear stress is 40 mpa? g-80gpa

Answers: 1

continue

Do you know the correct answer?

An 02-series single-row deep-groove ball bearing with a 30-mm bore is loaded with a 2 kN axial load...