Engineering
Engineering, 20.11.2020 14:00, JuniperGalaxy

An absolute encoder is mounted to the motor driving the X-axis lead screw of a CNC milling machine. If the encoder has a spec of 1250 PPR, a lead of 1.5 mm, and the lead screw moves a distance of 250 mm, how many revolutions of the lead screw will the encoder count and what is the resolution of the X-axis?

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, maciemarklin79981
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
image
Engineering, 04.07.2019 18:20, RiverH246
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
image
Engineering, 06.07.2019 03:10, betru12315
How to convert a friction to decimal ?
Answers: 1
image
Engineering, 06.07.2019 04:20, hailiemanuel930
Steam enters a turbine at steady state at 2 mpa, 360°c with a velocity of 100 m/s. saturated vapor exits at 0.1 mpa and a velocity of 50 m/s. the elevation of the inlet is 3 m higher than at the exit. the mass flow rate of the steam is 15 kg/s, and the power developed is 7 mw. let g 9.81 m/s^2. determine: a)-the area at the inlet, in m^2 b)-the rate of heat transfer between the turbine and surroundings, in kw c)-draw a p-v diagram for this process.
Answers: 1
Do you know the correct answer?
An absolute encoder is mounted to the motor driving the X-axis lead screw of a CNC milling machine....

Questions in other subjects:

Konu
Mathematics, 02.02.2020 21:58
Konu
Mathematics, 02.02.2020 21:58