Engineering, 19.11.2020 22:50, treaustin6978
Calculate the power transmitted through a 50 mm diameter solid steel shaft that is 2 m in length. The allowable shear stress on the shaft is 80 MPa, and the allowable angle of twist is 0.050 radians. The shaft is turning at 500 rpm, and has a shear modulus, G = 85,000 MPa.
Answers: 1
Engineering, 04.07.2019 18:10, Strick1530
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
Engineering, 04.07.2019 18:20, moneywaydaedae
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Calculate the power transmitted through a 50 mm diameter solid steel shaft that is 2 m in length. Th...
Mathematics, 27.03.2020 02:09
English, 27.03.2020 02:09
Social Studies, 27.03.2020 02:09
Mathematics, 27.03.2020 02:09