Engineering, 18.11.2020 17:50, nichelle2807

The gear on the right is the driving gear. If the driving gear moves at 100 RPM and the diameter of the wheel attached to the
driven gear is 2.75 in, how far in feet will the robot move in 2 minutes? How long in
seconds will it take to travel 100 feet?
Driven Gear Teeth:
Driving Gear Teeth:
Input Speed:
Gear Reduction:
Output Speed:
Distance Travelled in 1 Rotation:
Distance Travelled in 2 minutes:
How long to travel 100 feet:

The gear on the right is the driving gear.

If the driving gear moves at 100 RPM and the diameter

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, soreese02

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

continue

Do you know the correct answer?

The gear on the right is the driving gear. If the driving gear moves at 100 RPM and the diameter of...