Engineering, 18.11.2020 16:50, breannaratliff23

Air enters the compressor of an ideal Brayton refrigeration cycle at 100 kPa, 300K. The compressor pressure ratio is 3.75, and the temperature at the turbine inlet is 350K. Determine the (a) net work input, per unit mass of air flow, in kJ/kg. (b) refrigeration capacity, per unit mass of air flow, in kJ/kg. (c) coefficient of performance. (d) coefficient of performance of a Carnot refrigeration cycle operating between thermal reservoirs at Tc = 300K and Th = 350K, respectively.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 18:10, Candi9697

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Do you know the correct answer?

Air enters the compressor of an ideal Brayton refrigeration cycle at 100 kPa, 300K. The compressor p...