Engineering, 17.11.2020 17:20, johnb9163

an electrical network contains the following components: Load 1 is an electric bulbs rated 40w/220V, connected in 11^e to the source (E), Load 2 is rated 40w/220v, L2 connected in parallel to the source, Load 3 is rated 40w/220v, L3 connected in series with the source and Load 4 rated 75w/220v, L4 connected in 11^e to the source. Note that the circuit is protected by an automatic circuit breaker and is controlled by a switch. (a) Draw the complete schematic diagram of the network. (b) Calculate the voltage drop across each load in the circuit. (c) Calculate the total current flowing in the circuit. (d) Determine the size of the circuit breaker as well as the switch. (e) Determine the total power of the load. (f) Determine the current of each load. (g) find the total resistance of the circuit. Note that the supply voltage is 220v

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:10, QueenLife4869

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

continue

Engineering, 04.07.2019 18:20, safiyabrowne7594

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

continue

Do you know the correct answer?

an electrical network contains the following components: Load 1 is an electric bulbs rated 40w/220V,...