Engineering
Engineering, 13.11.2020 22:50, diamondgodbee123

A) A ground radar system is being used to track a missile after launch. The missile is flying straight up at 1,458 m/s and an altitude of 45,219 meters. The value of theta measured by radar is currently 138 degrees. What is the current value for r_dot? Give the numerical answer corresponding to m/s. b) what is the value of theta_dot? (the rate of change of theta)


A) A ground radar system is being used to track a missile after launch. The missile is flying strai

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, BardiFan
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
image
Engineering, 04.07.2019 18:10, viicborella
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
image
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
image
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Do you know the correct answer?
A) A ground radar system is being used to track a missile after launch. The missile is flying straig...

Questions in other subjects:

Konu
Mathematics, 10.11.2020 14:00
Konu
Mathematics, 10.11.2020 14:00
Konu
Chemistry, 10.11.2020 14:00
Konu
Mathematics, 10.11.2020 14:00
Konu
Mathematics, 10.11.2020 14:00