Engineering
Engineering, 12.11.2020 17:50, nylahnwalker

1. In an internal combustion engine, fuel is burned the engine.
2. In the
stroke of the four-stroke cycle, the piston rises, compressing the air-and-
fuel mixture trapped in the combustion chamber.
3. In an engine, the stroke is the distance the piston
4. When a piston is at its lowest position in the cylinder, it's said to be at
5. During the
stage of engine operation, gases are released from the cylinder.
6. A four-stroke engine will contain at least two mechanical valves called the
valve
and the
valve
7. In the
stroke of the four-stroke cycle, air mixed with fuel is drawn into the
cylinder.
8. The total engine
I is stated as the volume of the space swept through by all the
pistons.
9.
A two-stroke engine completes all four stages of engine operation in four piston
strokes
10. During the
stroke of the four-stroke cycle, the mixture of air and fuel is ignited,
and the contained explosion of the fuel presses the piston back down in the cylinder.
11. The top of a cylinder is sealed by the cylinder
12. The
is the ratio of the total cylinder volume to the clearance volume.

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, aliceohern
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
image
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
image
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
image
Engineering, 04.07.2019 18:10, tobyhollingsworth178
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
Do you know the correct answer?
1. In an internal combustion engine, fuel is burned the engine.
2. In the
stroke of the...

Questions in other subjects:

Konu
Mathematics, 04.02.2021 14:00
Konu
Mathematics, 04.02.2021 14:00
Konu
English, 04.02.2021 14:00
Konu
English, 04.02.2021 14:00