Engineering, 11.11.2020 19:00, sallabar2496

Task 1 Water is retained in a 1 m wide rectangular section channel by a sluice gate that can
pivot about its base, as shown below. Determine the total force on the gate due to the
water, the position where it is considered to act and the tension in the horizontal
retaining cable attached to the top of the gate when the depth of water in the channel
is 1.5 m. The density of water is 1000 kg/m3.
Cable tension = T
2 m
1.5 m
Pivot

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, margaret1758

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

continue

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, 0436500

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

continue

Do you know the correct answer?

Task 1 Water is retained in a 1 m wide rectangular section channel by a sluice gate that can
...