Engineering, 09.11.2020 01:20, tmrsavage02p7cj16

In a mixer (see image), due to use, a weight of 10 kg of cement was accumulated. This caused it to start to vibrate out of the ordinary and damage the bearing. Additionally it damaged an internal paddle. This was repaired with 100 grams of solder. The repair zone is located 45 cm from the center of rotation of the main shaft which is 3 ”thick. On this axis there is another pallet that has the same dimensions (60 cm long from the axis of rotation) and that is in the opposite direction to the damaged pallet. Mixer works at 20 RPM As an engineer, what is the solution to get the mixer up and running again?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, sarahgrindstaff123

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

continue

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, genyjoannerubiera

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

continue

Do you know the correct answer?

In a mixer (see image), due to use, a weight of 10 kg of cement was accumulated. This caused it to s...