Engineering, 07.11.2020 20:00, 710jonathan

Read through the paragraph on personal protective equipment on page 2 and fill in the blanks using the list of words below. Each word is used only once. Sewers
Ear defenders
Replaces
Drop
Hazards
Dust mask
Hands
Employer
Safety boots
85db
Protect
Falling objects
Tread
Helmet
Gauntlets
Responsibility
Noise
PPE

I have just started a new job, and it is the responsibility of my to supply the correct PPE for me to wear. PPE is designed to me against workplace . When we go on site I need good strong to protect my feet from things like dampness, in case I something on my foot and also in case I on an up-turned nail. My boss always asks me to use safety gloves to protect my . In fact, once I had to wear arm-length when we were working on some |On site I also have to wear a safety all the time. This is a good thing because it protects my head from any . Working with other trades, such the carpenters, can be hazardous because they make lots of with their power tools. If the noise is above we have to use , otherwise my hearing could be damaged. Because of all the sawdust they create when they are cutting wood, they regularly have to wear a , which stops them breathing in the dust.

I have to look after all the my boss gives me, as it is my . If something gets broken, he it for me as he does not want to get in to trouble with the HSE.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, ashleybaber4966

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:20, CelesteN64

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

continue

Engineering, 04.07.2019 18:20, xcapo1x

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

continue

Do you know the correct answer?

Read through the paragraph on personal protective equipment on page 2 and fill in the blanks using t...