Engineering, 01.11.2020 23:20, arnold2619

A Boeing 777 lands at Chicago O'Hare Airport (668 m elevation) where the pressure is 98.8 kPa. This 777 wing has a coefficient of lift of 1.46, and its wing area is 4618.8 ft^2. When the plane left St. Louis, its mass was 225.982 kg. Note that kilograms is mass not weight, so you need to convert it. During the flight to Chicago, 7,534 liters of fuel was used, where the jet fuel weighs 0.781 kg/L. What is the velocity in miles-per-hour at the port where the aircraft initially touches the ground?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 18:10, chadatkin

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

continue

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

Do you know the correct answer?

A Boeing 777 lands at Chicago O'Hare Airport (668 m elevation) where the pressure is 98.8 kPa. This...