Engineering, 31.10.2020 05:00, ymlantigua21

An engineering team is working on the design of a new hoverboard toy for children and adults. The new hoverboard must meet all safety guidelines. It must be manufactured for $75 or less, the battery should last at least 2 hours, and the hoverboard should be able to travel at least 6 mph. The table shows the results of tests for the first three designs. Hoverboard Designs
Design Cost Speed Battery Life Safety Guidelines Met
A $70 5mph 1 hour yes
B $65 8mph 2.5 hours no
C $75 6mph 2 hours yes
Identify how well each design meets the criteria and constraints.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, wirchakethan23

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

continue

Engineering, 04.07.2019 19:10, Mimidj9279

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Answers: 2

continue

Engineering, 04.07.2019 19:10, kelseiroll9759

Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.

Answers: 1

continue

Do you know the correct answer?

An engineering team is working on the design of a new hoverboard toy for children and adults. The ne...