Engineering
Engineering, 30.10.2020 16:20, tae8002001

What power can be provided from a turbine fed by a water pipe when the initial water pressure upstream of the turbine is 150 kPa, the pressure downstream of the turbine is 101 kPa, the pipe area upstream of the turbine is 1.5 m2 , the pipe area downstream of the turbine is 2.5 m2 , and the volumetric flow rate is 6 m3 /s? Assume no friction. Provide your answer in kW. [Ws = 325 kW]]

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
image
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
image
Engineering, 04.07.2019 18:10, 19deleonl
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
image
Engineering, 04.07.2019 18:10, meganwintergirl
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Do you know the correct answer?
What power can be provided from a turbine fed by a water pipe when the initial water pressure upstre...

Questions in other subjects:

Konu
Mathematics, 12.02.2021 05:30
Konu
Mathematics, 12.02.2021 05:30