Engineering, 29.10.2020 17:10, Jana1517
A single crystal of copper yields under a shear stress of 0.62 MPa. The shear modulus of copper is 7.9106 psi. Calculate the approximate ratio of the theoretical to the experimental shear strengths.
Answers: 2
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20, RiverH246
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Engineering, 04.07.2019 18:20, rhussein6452
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
Engineering, 04.07.2019 19:10, gabigalvis1091
What is the main objective of using reheat rankine cycle?
Answers: 3
A single crystal of copper yields under a shear stress of 0.62 MPa. The shear modulus of copper is 7...
Biology, 12.07.2019 11:00
Biology, 12.07.2019 11:00
History, 12.07.2019 11:00
Mathematics, 12.07.2019 11:00
Biology, 12.07.2019 11:00
Mathematics, 12.07.2019 11:00
History, 12.07.2019 11:00