Engineering, 28.10.2020 05:10, katelyn0579
a bracket for a 6 and 1/16 inch wide shelf is attached to the wall. The shelf support is 7 inches long and attached to the wall 3 and 1/2 inches below the shelf (forming a 30 degree angle with the shelf). If the shelf is expected to support a weight of 60 lbs attached at the front edge, what are the forces in the support and at the wall?
Answers: 1
Engineering, 04.07.2019 18:10, caitlynnpatton1208
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
a bracket for a 6 and 1/16 inch wide shelf is attached to the wall. The shelf support is 7 inches lo...
Mathematics, 15.08.2020 19:01
Chemistry, 15.08.2020 19:01
Mathematics, 15.08.2020 19:01