Engineering, 27.10.2020 17:50, xbeatdroperzx
A pipeline is being designed to withstand a total maximum pressure of 2.13 x 106 N/m2 . The 20-cm pipeline is ductile iron and conveys water at 40 L/sec. Determine the required thickness of the pipe wall if the operational head of the pipeline is 40 m and also subjected to water hammer if the flow control
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:20, cxttiemsp021
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Engineering, 05.07.2019 10:10, johns2380
What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.
Answers: 1
Engineering, 06.07.2019 03:20, mardell2587
Acountershaft is supported by two tapered roller bearings using indirect mounting. the radial bearing loads are 1120 lb for the left-hand bearing and 2190 lb for the right-hand bearing. the shaft rotates at 400 rpm and is to have an l10 life of 40,000 hours and an application factor of 1.4. assume ka2k 15, and find the required radial rating of each bearing
Answers: 3
Do you know the correct answer?
A pipeline is being designed to withstand a total maximum pressure of 2.13 x 106 N/m2 . The 20-cm pi...
Questions in other subjects:
Biology, 29.08.2019 11:30
Biology, 29.08.2019 11:30
Spanish, 29.08.2019 11:30
