Its
Homework: HW9
work
Score: 0 of 16 pts
2016 (o complete)
z/Test
SF...
Engineering, 25.10.2020 23:00, icantspeakengles
Its
Homework: HW9
work
Score: 0 of 16 pts
2016 (o complete)
z/Test
SF9-2 (similar to)
Advanced Automotive paid $160,000 for a group purchase of land, building, and equipment. At the time of th
building $51,000, and the equipment $34,000. Journalize the lump sum purchase of the three assets for a to
signed a note payable (Record a single compound journal entry Record debits first, then credits. Select the
Date
Accounts and Explanation
Debit
Answers: 2
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 19:10, santosbeti90
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
Engineering, 04.07.2019 19:20, diawia
Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?
Answers: 2
English, 03.03.2020 05:43