Engineering, 22.10.2020 16:01, ACE7RITZ

you have develope a super heat sotrage fluid and now need to determine its heat of vapoirization you set up an experiment with 60m cylindrical copper tube. the fluid enters the tube at 130 C at 100% vapor and exits at saturated liquid. the outer surface is exposed to water at 25C with a heat transfer coefficient of 200 W/m^2k. The inner surface heat transfer coerfficent is 350 W/m^2k. The inner tube diameter is 20 cm and the tubing is 2cm thick. If the mass flow rate is 0.1 kg/s. what us the heat of vaporization.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, margaret1758

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

continue

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:10, namira16

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

continue

Engineering, 04.07.2019 18:10, oshawn108

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k

Answers: 2

continue

Do you know the correct answer?

you have develope a super heat sotrage fluid and now need to determine its heat of vapoirization you...