Engineering
Engineering, 19.10.2020 18:01, jasmineanitak16

Because of your physics background, you landed a summer job as an assistant technician for a telephone company in California. During a recent earthquake, a 1.0-mile long underground telephone line is crushed at some point. This telephone line is made up of two parallel copper wires of the same diameter and same length, which are normally not connected. At the place where the line is crushed, the two wires make contact. Your boss wants you to find this place so that the wire can be dug up and fixed. You disconnect the line from the telephone system by disconnecting both wires of the line at both ends. You then go to one end of the line and connect one terminal of a 6.0-V battery to one wire, and the other terminal of the battery to one terminal of an ammeter (which has essentially zero resistance). When the other terminal of the ammeter is connected to the other wire, the ammeter shows that the current through the wire is 1 A. You then disconnect everything and travel to the other end of the telephone line, where you repeat the process and find a current of 1/3 A. Where is the short circuit?

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, heidiburgos1own6c0
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
image
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
image
Engineering, 04.07.2019 18:10, agpraga23ovv65c
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
image
Engineering, 04.07.2019 18:10, dval1146
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
Do you know the correct answer?
Because of your physics background, you landed a summer job as an assistant technician for a telepho...

Questions in other subjects: